How To Fix Flattened Carpet?

Image of a dog sitting on top of a carpet

Do you miss the once fluffy look of your carpet? You are not alone! Carpet remains to be one of the most popular flooring options but so is the struggle of keeping it fluffy and beautiful. We are here to help with the most effective ways to restore the soft and comfy feeling of carpet beneath your feet and the business listings of the best service providers

Whether your carpet has tightly looped fibers or long fibers for a shaggy look, it is always possible to fix a flattened carpet. If you are wondering why, you never needed to unflatten the carpet when it was new, here is a brief answer. New carpet fibers have a resilience that keeps them springy and elastic so they bounce back to their original shape. Excessive wear in high traffic areas, the weight of the furniture, or the accumulation of dust and grime can cause the fibers to lose their resilience. 

Although it is not easy to bring back the resilience of new fibers you can surely get back most of it with the following tips.

1. Blow Out the Carpet Fibers

If you are dealing with dents on a clean carpet and are probably wondering how to make carpet fluffy again? find a blow dryer. Just as a blow dryer can give volume to your hair, it can fluff up your carpet fibers too. Do you know how to fluff up the carpet in the simplest way? Get some plain water and spray it over the affected area.  Let it sit for a few minutes and then blow out the dampened fibers with the blow dryer. Hold the dryer about two inches above the carpet and use the fingers of the other hand to loosen and untangle the fibers. As you move the hot air back and forth, fluff the fibers. If required, repeat the process and finish off by vacuuming the carpet.  

2. Steam Iron the Fibers

If a greater stretch of carpet is flattened, a blow dryer may not suffice. It is easier to use iron to heat carpet fibers. You will need a cotton bath towel and a steam iron. Wet the towel and wring it until it is not dripping. Spread it over the carpet and set the iron to medium heat. Put the steam iron on top of the wet towel and move the iron over it for about sixty seconds. Infuse the carpet fibers with moisture and then remove the towel. Searching against the query of how to make carpet fluffy again? Use your fingers or carpet rake to fluff the fibers. Repeat if needed and vacuum clean the restored area.  

3. Melt An Ice Cube

You must be wondering about how to get divots out of carpet, this may take a bit longer but is pretty effective on carpet divots. All you have to do is to clean the affected area with a vacuum and then put a few ice cubes on it. Let the ice melt. When the fibers are fully wet, use a carpet rake or your fingers to detangle and fluff the fibers. Blow-dry or steam clean the area before vacuuming it for final finishes. 

4. Deep Clean with A Vacuum

How to fluff up carpet? When the entire carpet looks crushed or there is a clearly defined path of flattened carpet fibers, the resilience of the fibers can often be reinstated by deep carpet cleaning. Dirt and grime can hold down the fibers thus a good clean can leave the carpet brighter and fluffier.

5. Powerful Steam Cleaner

Soil weighs down the fibers and if left for a long time, it can wear it down. If you have a steam carpet cleaner, it can be used to restore the look. You can also choose to rent a powerful steam cleaner to fluff the carpet fibers.

6. Water And Vinegar Combo

How to make the carpet fluffy again without spending a lot? Mix three parts of water and one part of white vinegar in a spray bottle and spritz the affected area with it. Start with vacuuming and then working in a small 3-feet x 3-feet area. Spray the solution onto the carpet until it's very damp and then let it sit for five to ten minutes.

 Use cotton towels of microfiber cloth to blot away the excess solution and loosen dirt. Allow the carpet to air dry and then use a carpet rake and vacuum to lift the fibers.

7. Baking Soda and Salt Mixture

Need instant results without a steam iron? We have got you covered. Vacuum clean the carpet and then sprinkle it liberally with a one-to-one mixture of baking soda and table salt. Spray the area with plain water and scrub the mixture into the carpet using a nylon-bristled scrub brush. Use old towels to remove the loosened dirt and let the carpet air dry. Now vacuum the entire carpet to remove the remaining salt and baking soda. You will get a clean, unflatten, and odorless carpet.

Hire Best Professionals & Fix Flattened Carpet

Reading a guide on how to re-fluff carpet is easier. Getting into real action takes time, hard work, and some patience. If you are finding it hard to manage this task with your daily routine, no need to worry. Several carpet cleaning and restoration companies are ready to help you. We understand that finding the best service providers is not an easy feat. That’s why we have made business listings of the best carpet restoration companies in your area. Visit us now through a well-reputed directory such as Topspot 101